Question 1

How many square feet does 1 ton of asphalt cover?

Accepted Answer

At a standard compacted density of 145 lbs/cu ft, one ton (2,000 lbs) of asphalt covers approximately 165 square feet at 1 inch depth, 80 to 82.5 square feet at 2 inches depth, and roughly 53 to 55 square feet at 3 inches depth. To find your coverage, divide 165.5 by your desired thickness in inches.

Question 2

Why is 145 lbs per cubic foot the standard density factor?

Accepted Answer

145 lbs/cu ft (approximately 2.32 specific gravity or 2,323 kg/m³) is the benchmark compacted unit weight established by AASHTO (American Association of State Highway and Transportation Officials) and ASTM standards. When hot mix asphalt is rolled with vibratory steel drums, air voids decrease to 4%-6%, yielding this exact density across standard dense-graded aggregate mixtures.

Question 3

How thick should an asphalt driveway or parking lot be?

Accepted Answer

For standard residential passenger car driveways, a compacted thickness of 2.5 to 3 inches over a stable 6- to 8-inch crushed stone subbase is recommended. Light walking paths and bike trails require 2 inches, while commercial parking lots and delivery lanes carrying heavy truck traffic require 4 to 6 inches, typically installed in two distinct layers: a coarse binder course and a dense wearing course.

Question 4

What is the difference between tons and cubic yards of asphalt?

Accepted Answer

A cubic yard measures volume (27 cubic feet), whereas a ton measures weight (2,000 lbs). Because asphalt weighs 145 lbs per cubic foot, one cubic yard of compacted asphalt weighs 3,915 lbs (27 × 145). This equals 1.9575 short tons. As a rule of thumb for civil estimators, 1 cubic yard of asphalt is virtually equivalent to 2 short tons.

Question 5

How much extra asphalt should I order for compaction and waste?

Accepted Answer

Industry best practice recommends adding a 5% safety margin for regular rectangular driveways and up to 10% for irregular shapes, turnaround curves, or uneven subgrades. Because asphalt plants sell in bulk and hot mix cools quickly, running short causes cold joints that jeopardize structural longevity.

Question 6

How many tons of asphalt does a standard dump truck haul?

Accepted Answer

A standard tri-axle dump truck typically hauls between 16 and 22 tons of asphalt. Tandem axle dump trucks hold approximately 12 to 15 tons, while large quad-axle or semi-trailer end dump units can transport 24 to 28 tons.

Question 7

What is the difference between Hot Mix Asphalt (HMA) and Cold Patch?

Accepted Answer

Hot Mix Asphalt (HMA) is heated to 300°F–350°F at the plant and rolled while hot (above 175°F) for maximum load bearing, smooth finish, and 20+ year lifespan. Cold patch asphalt is blended with cutback additives so it remains pliable at room temperature, making it suitable for temporary winter pothole repairs.

Question 8

Can asphalt be paved directly over an existing concrete slab?

Accepted Answer

Yes, asphalt can be paved over existing concrete if the concrete is structurally sound and free from major settlement or vertical stepping. Concrete expansion joints must be clean, cracked slabs repaired, and a specialized tack coat (liquid asphalt emulsion) sprayed to create an adhesive bond between the materials.

Contact Us

Contractors & Bids

Formula Queries

Instant Answers